Default PIN on 1.3.2.7 / T68i

Hi,

I've been trying to track down the menu from where I can change the PIN for
new connections to my Bluetooth devices...

I'm running an MSI-6769 with (adjusted) TDK/Anycom Bluetooth Software
1.3.2.7. ISTR it asks you for a PIN when you first run the install wizard,
but trying it out, it seems to be set to 0000. I can't find the setting to
change it anywhere!

The same applies to the T68i - is it permamently set to '0000'? And for
other devices? Seems there's a lot of devices out there ripe for the picking
(free DUN, contact list download, etc!)


Damian

You don't change it so much as you select a code when prompted and you give
the proper response on the device you're talking to.

TC

"Damian Skeeles" <dskeeles@yahoo.com> wrote in message
news:2c98e651.0307260141.1b71b4e@posting.google.co m...
> "Tony Clark" <waclark@mindspring.com> wrote in message
news:<bet39s$k8t$1@slb4.atl.mindspring.net>...
> > don't know about the SW you're using but the T68i usually prompts for a
PIN
> > number. I know for a fact that you can enter a specific PIN on the T68
other
> > than 0000.
> >
> > Cheers
> > TC
> >
>
> I've been looking for that - I'll have to try the manual again...
>
> But does anyone know how you can change the code on the Anycom / TDK
> 1.3.2.7 Bluetooth drivers? That's fairly critical, given the services
> you can access on a PC.
>
>
> Damian

"Tony Clark" <waclark@mindspring.com> wrote in message news:<bg1nad$85a$1@slb6.atl.mindspring.net>...

> > But does anyone know how you can change the code on the Anycom / TDK
> > 1.3.2.7 Bluetooth drivers? That's fairly critical, given the services
> > you can access on a PC.
> >
> > You don't change it so much as you select a code when prompted and you give
> the proper response on the device you're talking to.
>
> TC

<Blinding flash of realisation>

So the standard calls for the same PIN to be entered on each device...
and not necessarily any preset PIN...

Although some devices do allow a PIN to be preconfigured, so that they
can auto-authenticate if the pairing device supplies the same digits?


Damian