BT networking

While not attached with my 10/100 ethernetcards i would like to access/
create a network with my 2 MSI USB-Bluetooth transceivers.
I thougt this would be ease as I allready have a ethernet-network, so all
settings and software utils are ok.
What am I doing wrong? Is it necessary to use other IP-numbers than my
ethernet-settings?
TIA Neevok

You'll need ICS in one machine. HAve a look in our Guides on how to setup
this.

From the non-ICS machine open the Bluetooth places, find the icon
corresponding to the "server", right-click and select "Connect to LAN
Access". If all is good, you should be connected.

--
Mauricio Freitas
Handhelds, mobile: http://www.geekzone.co.nz or
http://www.bluetoothguide.com
Bluetooth guides: http://www.geekzone.co.nz/content.asp?contentid=449


"neevok" <neevokNOSPAM@hetnet.nl> wrote in message
news:bei373$oa4$1@reader08.wxs.nl...
> While not attached with my 10/100 ethernetcards i would like to access/
> create a network with my 2 MSI USB-Bluetooth transceivers.
> I thougt this would be ease as I allready have a ethernet-network, so all
> settings and software utils are ok.
> What am I doing wrong? Is it necessary to use other IP-numbers than my
> ethernet-settings?
> TIA Neevok
>
>