Visor Pro hangs with Red-M Blade springboard module

I think I have narrowed the cause of the problem down to the TealEcho
hack. I am running the most recent version (v2.41) released in 2001.
Details on the TealPoint Software website (http://www.tealpoint.com).

I have just obtained and installed the Blade v3.30.02dA1 flash upgrade
from the support department at Red-M but that doesn't seem to have
stopped the hanging from occuring.

Any suggestions how to resolve this problem? I would like to keep
using the TealEcho hack if possible.

Please copy any reply to mikebear@netspace.net.au

Thanks,
Michael.


"Mauricio Freitas" <dr.emailposter@nowhere.invalid> wrote in message news:<%mWCa.2068$Jq3.445667@news02.tsnz.net>...
> "Michael Barnett" <mikebear@netspace.net.au> wrote in message
> news:12cbc694.0306021629.47e96dea@posting.google.c om...
> > I took delivery of a new Red-M Blade "Bluetooth Module for Visor"
> > yesteday. I bought it for my Handspring Visor Pro.
> >
> > Since installing the module I find the Visor will hang or freeze from
> > time to time and need to be soft reset.
> >
> > It seems to happen when I turn the Visor on although as it has only
> > happened 3 times so far I can't be sure if that is the only time it
> > will happen.
> >
> > The Visor Pro is running PalmOS v 3.5.2H3.0 and the Blade module is v
> > 3.30.01H
> >
> > Any suggestions?
> >
> > Please copy all replies to my email address
> > (mikebear@netspace.net.au).
> >
> > Thanks,
> > Michael.
>
> Mike, I've had a Visor Prism with Red-M Blade before and it worked very
> well - better than the Palm BT SD card actually.
>
> Perhaps you have a hack installed or other program interfering with the
> Bluetooth stack? Have you removed/disabled all hacks, Menu programs and
> tried using it for a while, then enabling one at a time, every few days, to
> try and find if anyone causes this?

So, if you connect with TealEcho off it works fine?

Have you tried Jot? It gives you the same functionality, and perhaps not the
problem.

--
Mauricio Freitas
Handhelds, mobile: http://www.geekzone.co.nz or
http://www.bluetoothguide.com
Bluetooth guides: http://www.geekzone.co.nz/content.asp?contentid=449


"Michael Barnett" <mikebear@netspace.net.au> wrote in message
news:12cbc694.0306250536.2fd08dd9@posting.google.c om...
> I think I have narrowed the cause of the problem down to the TealEcho
> hack. I am running the most recent version (v2.41) released in 2001.
> Details on the TealPoint Software website (http://www.tealpoint.com).
>
> I have just obtained and installed the Blade v3.30.02dA1 flash upgrade
> from the support department at Red-M but that doesn't seem to have
> stopped the hanging from occuring.
>
> Any suggestions how to resolve this problem? I would like to keep
> using the TealEcho hack if possible.
>
> Please copy any reply to mikebear@netspace.net.au
>
> Thanks,
> Michael.
>
>
> "Mauricio Freitas" <dr.emailposter@nowhere.invalid> wrote in message
news:<%mWCa.2068$Jq3.445667@news02.tsnz.net>...
> > "Michael Barnett" <mikebear@netspace.net.au> wrote in message
> > news:12cbc694.0306021629.47e96dea@posting.google.c om...
> > > I took delivery of a new Red-M Blade "Bluetooth Module for Visor"
> > > yesteday. I bought it for my Handspring Visor Pro.
> > >
> > > Since installing the module I find the Visor will hang or freeze from
> > > time to time and need to be soft reset.
> > >
> > > It seems to happen when I turn the Visor on although as it has only
> > > happened 3 times so far I can't be sure if that is the only time it
> > > will happen.
> > >
> > > The Visor Pro is running PalmOS v 3.5.2H3.0 and the Blade module is v
> > > 3.30.01H
> > >
> > > Any suggestions?
> > >
> > > Please copy all replies to my email address
> > > (mikebear@netspace.net.au).
> > >
> > > Thanks,
> > > Michael.
> >
> > Mike, I've had a Visor Prism with Red-M Blade before and it worked very
> > well - better than the Palm BT SD card actually.
> >
> > Perhaps you have a hack installed or other program interfering with the
> > Bluetooth stack? Have you removed/disabled all hacks, Menu programs and
> > tried using it for a while, then enabling one at a time, every few days,
to
> > try and find if anyone causes this?