What Options if There is no pre-wiring loom,VDA connector on ZAFIRA?

In message <35556486.0307250244.61d4cfb1@posting.google.com>, David
<DavidPage750@hotmail.com> writes
>I have Zafira 02 CLUB
>What options do I have if I have not got the pre-wiring phone loom,
>VDA connector nor the antenna. I wish to install CARK91 where the
>telehone audio goes thru the car speakers.
>
>I have checked the white square that should contain the transformer-
>it does not actually have any metal connector sockets in it, so one
>assumes that there is also not any wires attached to it either. The
>metal connector sockets for Fuse 19 (10A) is also missing. The VDA
>connector and the antenna are also missing.
>
>I did have the CAR300 radio but I swapped it for Delco CDR500
>CDPlayer. I checked the ISO connector plate where the CDR500 slots
>into and the metal connector sockets are missing for TEL MUTE and TEL
>AUDIO, although all the metals contacts are there.

I suspect the VDA wiring is missing because the factory radio was CAR300
- which, from memory, has no phone support. The Club, being the base
model, may well have a stripped down wiring loom as well - as many of
the options on higher models aren't available even as factory extras on
the Club.


Your options now are somewhat limited - at least without a load of
hassle.


I presume you have my document from
<http:://www.wood2.org.uk/carkit.doc>


I think your only option is going to be installing the missing contacts
into the radio plug (the documentation is on the top of the radio,
actually), and finding your own power feeds. The VDA microphone is a
dead loss - use a Nokia one.

The mute line is easy enough - yellow wire to the mute terminal on the
radio's ISO connector. You'll need to get hold of the transformer and
figure out which winding is which. If you want to go down this route,
email me, and I'll see if amongst the papers I have on file I've got the
wiring details of the transformer.


>Any help and advice much appreciated.

Well - I wouldn't want to attempt what you're doing - but I'll do what I
can to help.




David
--
David Wood
david@wood2.org.uk

David Wood <david@wood2.org.uk> wrote in message news:<Wo86L5CWjbI$EAlb@wood2.org.uk>...
> In message <35556486.0307250244.61d4cfb1@posting.google.com>, David
> <DavidPage750@hotmail.com> writes
> >I have Zafira 02 CLUB
> >What options do I have if I have not got the pre-wiring phone loom,
> >VDA connector nor the antenna. I wish to install CARK91 where the
> >telehone audio goes thru the car speakers.
> >
> >I have checked the white square that should contain the transformer-
> >it does not actually have any metal connector sockets in it, so one
> >assumes that there is also not any wires attached to it either. The
> >metal connector sockets for Fuse 19 (10A) is also missing. The VDA
> >connector and the antenna are also missing.
> >
> >I did have the CAR300 radio but I swapped it for Delco CDR500
> >CDPlayer. I checked the ISO connector plate where the CDR500 slots
> >into and the metal connector sockets are missing for TEL MUTE and TEL
> >AUDIO, although all the metals contacts are there.
>
> I suspect the VDA wiring is missing because the factory radio was CAR300
> - which, from memory, has no phone support. The Club, being the base
> model, may well have a stripped down wiring loom as well - as many of
> the options on higher models aren't available even as factory extras on
> the Club.
>
>
> Your options now are somewhat limited - at least without a load of
> hassle.
>
>
> I presume you have my document from
> <http:://www.wood2.org.uk/carkit.doc>
>
>
> I think your only option is going to be installing the missing contacts
> into the radio plug (the documentation is on the top of the radio,
> actually), and finding your own power feeds. The VDA microphone is a
> dead loss - use a Nokia one.
>
> The mute line is easy enough - yellow wire to the mute terminal on the
> radio's ISO connector. You'll need to get hold of the transformer and
> figure out which winding is which. If you want to go down this route,
> email me, and I'll see if amongst the papers I have on file I've got the
> wiring details of the transformer.
>
>
> >Any help and advice much appreciated.
>
> Well - I wouldn't want to attempt what you're doing - but I'll do what I
> can to help.
>
>
>
>
> David

Thanks for the quick response. I have read your document and thats
when I realised that I needed advice. If you can, please send me any
info. that you may have on the transformer wiring. Thanks in advance

"David" <DavidPage750@hotmail.com> wrote in message
news:35556486.0307260041.5d44627f@posting.google.c om...
> David Wood <david@wood2.org.uk> wrote in message
news:<Wo86L5CWjbI$EAlb@wood2.org.uk>...
> > In message <35556486.0307250244.61d4cfb1@posting.google.com>, David
> > <DavidPage750@hotmail.com> writes
> > >I have Zafira 02 CLUB
> > >What options do I have if I have not got the pre-wiring phone loom,
> > >VDA connector nor the antenna. I wish to install CARK91 where the
> > >telehone audio goes thru the car speakers.
> > >
> > >I have checked the white square that should contain the transformer-
> > >it does not actually have any metal connector sockets in it, so one
> > >assumes that there is also not any wires attached to it either. The
> > >metal connector sockets for Fuse 19 (10A) is also missing. The VDA
> > >connector and the antenna are also missing.
> > >
> > >I did have the CAR300 radio but I swapped it for Delco CDR500
> > >CDPlayer. I checked the ISO connector plate where the CDR500 slots
> > >into and the metal connector sockets are missing for TEL MUTE and TEL
> > >AUDIO, although all the metals contacts are there.
> >
> > I suspect the VDA wiring is missing because the factory radio was CAR300
> > - which, from memory, has no phone support. The Club, being the base
> > model, may well have a stripped down wiring loom as well - as many of
> > the options on higher models aren't available even as factory extras on
> > the Club.
> >
> >
> > Your options now are somewhat limited - at least without a load of
> > hassle.
> >
> >
> > I presume you have my document from
> > <http:://www.wood2.org.uk/carkit.doc>
> >
> >
> > I think your only option is going to be installing the missing contacts
> > into the radio plug (the documentation is on the top of the radio,
> > actually), and finding your own power feeds. The VDA microphone is a
> > dead loss - use a Nokia one.
> >
> > The mute line is easy enough - yellow wire to the mute terminal on the
> > radio's ISO connector. You'll need to get hold of the transformer and
> > figure out which winding is which. If you want to go down this route,
> > email me, and I'll see if amongst the papers I have on file I've got the
> > wiring details of the transformer.
> >
> >
> > >Any help and advice much appreciated.
> >
> > Well - I wouldn't want to attempt what you're doing - but I'll do what I
> > can to help.
> >
> >
> >
> >
> > David
>
> Thanks for the quick response. I have read your document and thats
> when I realised that I needed advice. If you can, please send me any
> info. that you may have on the transformer wiring. Thanks in advance


Blimey! why don't you just buy one of these
http://www.autoleads.co.uk/product/m...=false&id=2862

Regards

Steve

www.autoelectronix.co.uk

In message <bfuf40$pnb$1@titan.btinternet.com>, Steve H
<enquiries@autoelectronix.co.uk> writes
>Blimey! why don't you just buy one of these
>http://www.autoleads.co.uk/product/m...=false&id=2862

It's neater to use the audio input on the radio if you can - for a
start, it means that the steering wheel volume controls work.

However, the original poster's car is going to lack steering wheel
controls, as it was originally supplied with a CAR300.


Maybe that lead is the best solution in this case. I certainly wouldn't
want to attempt what he is intending to!




David
--
David Wood
david@wood2.org.uk

Thanks for all your input. I have now ordered the Autolead PC6-102. Thanks again.

[dyeniexqueree]

Orgasm Enhancer can maximize your pleasure and deliver the ultimate orgasm!
This greatly increased volume of ejaculate doubles the duration of the male orgasm.
Imagine - orgasms that last twice as long and are five times as intense!
You can buy the Orgasm Enhancer absolutely anonimously. Fastest shipping worldwide!

JUST VISIT OUR ONLINE PHARMACY STORE TO FIND OUT MORE ABOUT THE ORGASM ENHANCER:


>>>CLICK HERE TO ORDER ORGASM ENHANCER FDA APPROVED<<<